+-

+-Recent Topics

CDI ignition by Ian F
Today at 08:44:04 pm

Whilton Mill Endurance Race, Tues 25th Oct 2022 by Chris L
Today at 07:35:47 pm

Lundy Flyers Beach Drone Video by Andy_B
Today at 02:33:11 pm

Bédélia by Tinworm
29 September 2022, 02:04:28 pm

My parts quest has begun for the Vale Special. by Moogie38 (Noel)
28 September 2022, 08:13:50 pm

BSA 3 wheeler. by Jimr1999
28 September 2022, 07:11:33 am

Overalls by jim
28 September 2022, 05:46:09 am

Riley Special chassis (Bridget the Riley) by synthpunk
26 September 2022, 09:05:38 pm

Sywell Classic pistons and props 24-25 sept 2022 by Moogie38 (Noel)
26 September 2022, 05:46:27 pm

1923 Fiat SB4 "Mefistofele" by Drag
25 September 2022, 10:43:35 pm

Recent Posts

Re: CDI ignition by Ian F
Today at 08:44:04 pm

Re: CDI ignition by Jimr1999
Today at 08:24:52 pm

Re: CDI ignition by Ian F
Today at 07:40:38 pm

Re: Whilton Mill Endurance Race, Tues 25th Oct 2022 by Chris L
Today at 07:35:47 pm

Re: Whilton Mill Endurance Race, Tues 25th Oct 2022 by Andy_B
Today at 02:37:47 pm

Re: Lundy Flyers Beach Drone Video by Andy_B
Today at 02:33:11 pm

Re: CDI ignition by Moogie38 (Noel)
Today at 12:07:11 pm

CDI ignition by Jimr1999
Today at 11:42:43 am

Re: Bédélia by Tinworm
29 September 2022, 02:04:28 pm

Re: Whilton Mill Endurance Race, Tues 25th Oct 2022 by dunworkin
29 September 2022, 10:16:33 am

Re: Whilton Mill Endurance Race, Tues 25th Oct 2022 by Ian F
29 September 2022, 09:19:20 am

Re: Whilton Mill Endurance Race, Tues 25th Oct 2022 by jim
29 September 2022, 06:02:49 am

Re: Whilton Mill Endurance Race, Tues 25th Oct 2022 by StefanN
28 September 2022, 08:57:43 pm

Re: My parts quest has begun for the Vale Special. by Moogie38 (Noel)
28 September 2022, 08:13:50 pm

Re: Lundy Flyers Beach Drone Video by uncantim
28 September 2022, 05:10:35 pm

Lundy Flyers Beach Drone Video by Andy_B
28 September 2022, 12:13:30 pm

New member thislldo by CKGB
28 September 2022, 09:43:53 am

Re: BSA 3 wheeler. by Jimr1999
28 September 2022, 07:11:33 am

Re: Whilton Mill Endurance Race, Tues 25th Oct 2022 by jim
28 September 2022, 06:00:07 am

Re: Whilton Mill Endurance Race, Tues 25th Oct 2022 by jim
28 September 2022, 05:58:55 am

Top Boards

Board Topics Posts
Build journals New 61 1958
Tech Forum New 221 1836
Events New 110 1597
Members New 321 855
Off Topic New 101 551
Where to get stuff New 48 534
For sale and wanted New 29 114
CK number register New 7 53
CKGB Club New 6 31
Announcements New 13 18

Top Topics

Views Replies
Dodge baquet ish build. 101458 149
Delage 15-S-8 53151 183
Bugatti Type 37 Build 34191 176
Article in the Parish Magazine 33854 6
Napier 1903 Gordon Bennett 27890 66
Whilton mill kart track practice days. 22258 31
Brakes 20576 39
Builders Meeting. Coventry Transport Museum. Saturday February 1st 2020. 20075 31
Helping the builders who have yet to start 19909 18
CK 1 (ERA) build 17241 53

Author Topic: Dodge baquet ish build.  (Read 101458 times)

jim

  • Sr. Member
  • ****
  • Posts: 477
  • Location: northants
    • View Profile
Dodge baquet ish build.
« on: 21 November 2019, 06:57:26 am »
So I thought I would build a cyclekart. Something simple that wouldn't take too long. The inspiration was a 1935 Dodge baquet.
« Last Edit: 26 February 2021, 12:02:43 pm by StefanN »

Share on Facebook Share on Twitter


jim

  • Sr. Member
  • ****
  • Posts: 477
  • Location: northants
    • View Profile
Re: Dodge baquet ish build.
« Reply #1 on: 21 November 2019, 07:04:06 am »
This is my original sketch of what it might look like.

TheGiantTribble

  • Sr. Member
  • ****
  • Posts: 280
  • Bill Alexander, Maserati 750 V8R1 Red
  • Location: Clacton on Sea, Essex.
    • View Profile
Re: Dodge baquet ish build.
« Reply #2 on: 21 November 2019, 09:09:13 am »
Nice choice, something a bit different again for the ranks.
And from your sketch it would appear to scale very well for a CK.
I approve :-)

RhysN

  • Hero Member
  • *****
  • Posts: 945
  • Location: Tamworth
    • View Profile
Re: Dodge baquet ish build.
« Reply #3 on: 21 November 2019, 02:28:20 pm »
That's a nice looking car. I would suggest spending a bit of time on figuring how you get you, and the drive package in there though.

jim

  • Sr. Member
  • ****
  • Posts: 477
  • Location: northants
    • View Profile
Re: Dodge baquet ish build.
« Reply #4 on: 21 November 2019, 05:38:54 pm »
I had some 2mm sheet cut to my graph paper drawing which was just measured off the sketch. A few strips of 30mm x 2mm for the top and bottom of the chassis. I used some old shelving brackets to jig it.

jim

  • Sr. Member
  • ****
  • Posts: 477
  • Location: northants
    • View Profile
Re: Dodge baquet ish build.
« Reply #5 on: 21 November 2019, 05:56:01 pm »
Keep it simple went out of the window, there's gonna be miles of welding ahead. Tacked up with front cross member and a rear which will be the seat support.

jim

  • Sr. Member
  • ****
  • Posts: 477
  • Location: northants
    • View Profile
Re: Dodge baquet ish build.
« Reply #6 on: 21 November 2019, 06:24:29 pm »
Front leaf springs fitted. 1 1/2" × 3/16 × 20" They feel like the correct poundage.

jim

  • Sr. Member
  • ****
  • Posts: 477
  • Location: northants
    • View Profile
Re: Dodge baquet ish build.
« Reply #7 on: 21 November 2019, 07:18:29 pm »
Front axle halfway through and rear leaf springs fitted.

StefanN

  • Administrator
  • Hero Member
  • *****
  • Posts: 854
  • Location: Bagshot, Surrey, United Kingdom
    • View Profile
Re: Dodge baquet ish build.
« Reply #8 on: 21 November 2019, 11:09:10 pm »
Love it....rear springs too?!

jim

  • Sr. Member
  • ****
  • Posts: 477
  • Location: northants
    • View Profile
Re: Dodge baquet ish build.
« Reply #9 on: 22 November 2019, 06:20:46 am »
Thanks for the nice comments everyone. I have no idea if the rear leaf springs will work properly or just keep chucking the chain off. I had a look at a few chain driven cars with leaf springs at the nec classic car show a couple of weeks ago so  it can be done. The diff is done and now almost have a rolling chassis. Why didn't I just keep it simple.

TheGiantTribble

  • Sr. Member
  • ****
  • Posts: 280
  • Bill Alexander, Maserati 750 V8R1 Red
  • Location: Clacton on Sea, Essex.
    • View Profile
Re: Dodge baquet ish build.
« Reply #10 on: 22 November 2019, 09:31:09 am »
Impressive progress indeed.

ChrisS

  • Full Member
  • ***
  • Posts: 234
  • Location: Crowborough, East Sussex
    • View Profile
Re: Dodge baquet ish build.
« Reply #11 on: 22 November 2019, 10:33:38 am »
very nice work Jim, looking forward to your next report!

Graham Hill

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 398
  • Location: Leicester UK
    • View Profile
Re: Dodge baquet ish build.
« Reply #12 on: 22 November 2019, 11:40:22 am »
Hi Jim. I've not commented previously but thanks for taking the time to post regularly and share your skills and ideas. I love what you are doing, keep them coming please.

Marek.Z.N

  • Sr. Member
  • ****
  • Posts: 332
  • Building an electric Delage 15-S-8
  • Location: Bagshot, Surrey
    • View Profile
Re: Dodge baquet ish build.
« Reply #13 on: 22 November 2019, 07:24:39 pm »
Wow! that is amazing

jim

  • Sr. Member
  • ****
  • Posts: 477
  • Location: northants
    • View Profile
Re: Dodge baquet ish build.
« Reply #14 on: 24 November 2019, 10:58:18 am »
Thanks again for the nice comments. Hub adapters done and mocking up the rear brakes.