CycleKarts GB
Forums => Tech Forum => Topic started by: Moogie38 (Noel) on 19 Feb 23, 12:25 pm
-
Is there a 10mm banjo fitting for 3/16 copper line ?
All I can seem to find are banjo fittings for braided hose.
-
There probably is a brake fitting but I couldn’t find one.
I did find that a Suzuki jimny flexible pipe has a 10mm banjo on one end and a 10mm thread on the other. I used a copper pipe with 3/16 pipe on one end and a 10mm male on the other to connect to the flexible jimny pipe.
It’s a bit of a long way around but it worked!
-
There probably is a brake fitting but I couldn’t find one.
I did find that a Suzuki jimny flexible pipe has a 10mm banjo on one end and a 10mm thread on the other. I used a copper pipe with 3/16 pipe on one end and a 10mm male on the other to connect to the flexible jimny pipe.
It’s a bit of a long way around but it worked!
Thanks Mark, I would be happy with that option, its something I could work with.
-
After a bit of searching I came up with these.
[attach=1]
M10x1 banjo adapter to allow you to use 3/16" copper brake pipe instead of trying to find one of those ridiculously long double ended banjo flexi hoses. I found these at
https://www.brtmotorsport.co.uk/collections/brake-fitting-adaptors/products/m10-3-8-stainless-steel-banjo-adaptor-with-m10x1-male-thread
You will also require these m10x1 female brake pipe tube nut.
[attach=2]
I'm in the process of connecting it all up at the moment so we'll let you know how it goes.